log of 3.18 msm8939-adding-smmu

<6>[    0.667324] gdsc_mdss: no parameters
<6>[    0.672003] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
<4>[    0.672050] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
<4>[    0.672080] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
<6>[    0.707133] gcc-mdss-8936 soc:qcom,gcc-mdss@1a98300: Registered GCC MDSS clocks.
<3>[    0.941653] mdss_mdp_probe+0x254/0x10cc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
<3>[    0.942356] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
<6>[    0.944280] mdss_mdp_pipe_addr_setup: type:0 ftchid:1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
<6>[    0.944351] mdss_mdp_pipe_addr_setup: type:1 ftchid:7 xinid:1 num:3 rect:0 ndx:0x8 prio:1
<6>[    0.944373] mdss_mdp_pipe_addr_setup: type:1 ftchid:8 xinid:5 num:4 rect:0 ndx:0x10 prio:2
<6>[    0.944429] mdss_mdp_pipe_addr_setup: type:2 ftchid:4 xinid:2 num:6 rect:0 ndx:0x40 prio:3
<3>[    0.944471] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
<3>[    0.944843] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
<4>[    0.945987] mdss_debug_register_dump_range: No xlog range dump found, continue
<6>[    0.947146] mdss_mdp_probe: mdss version = 0x10080000, bootloader display is on, num 1, intf_sel=0x00000100
<3>[    0.951749] mdss_smmu_util_parse_dt_clock: clocks are not defined
<4>[    0.951967] LR is at mdss_smmu_probe+0x490/0x644
<4>[    0.955270] [<ffffffc0004a95a8>] mdss_smmu_probe+0x490/0x644
<4>[    0.955458] [<ffffffc0010181b4>] mdss_smmu_driver_init+0x20/0x50
<5>[    0.000000] Kernel command line: boot_cpus=0,4,5,6,7 sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 loop.max_part=7 androidboot.selinux=permissive buildvariant=userdebug androidboot.emmc=true androidboot.emmcname=HAG2e androidboot.serialno=19836c08 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_ams497_720p_video:1:none
<6>[    0.707150] gdsc_mdss: no parameters
<6>[    0.711783] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
<4>[    0.711831] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
<4>[    0.711863] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
<6>[    0.746861] gcc-mdss-8936 soc:qcom,gcc-mdss@1a98300: Registered GCC MDSS clocks.
<3>[    0.981112] mdss_mdp_probe+0x254/0x10cc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
<3>[    0.981862] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
<6>[    0.983794] mdss_mdp_pipe_addr_setup: type:0 ftchid:1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
<6>[    0.983861] mdss_mdp_pipe_addr_setup: type:1 ftchid:7 xinid:1 num:3 rect:0 ndx:0x8 prio:1
<6>[    0.983882] mdss_mdp_pipe_addr_setup: type:1 ftchid:8 xinid:5 num:4 rect:0 ndx:0x10 prio:2
<6>[    0.983938] mdss_mdp_pipe_addr_setup: type:2 ftchid:4 xinid:2 num:6 rect:0 ndx:0x40 prio:3
<3>[    0.983978] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
<3>[    0.984354] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
<4>[    0.985493] mdss_debug_register_dump_range: No xlog range dump found, continue
<3>[    0.985666] /soc/qcom,mdss_mdp@1a00000/qcom,smmu_mdp_unsec_cb: arguments longer than property
<3>[    0.986156] /soc/qcom,mdss_mdp@1a00000/qcom,smmu_mdp_sec_cb: arguments longer than property
<6>[    0.986733] mdss_mdp_probe: mdss version = 0x10080000, bootloader display is on, num 1, intf_sel=0x00000100
<3>[    0.991632] mdss_smmu_probe: iommu create mapping failed for domain[0]
<4>[    0.991756] mdss_smmu: probe of 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb failed with error -12
<3>[    0.992153] mdss_smmu_probe: iommu create mapping failed for domain[2]
<4>[    0.992261] mdss_smmu: probe of 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb failed with error -12
<4>[    0.993515] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
<4>[    0.993555] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
<4>[    0.993593] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
<6>[    0.995315] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
<6>[    0.996246] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ams497_720p_video:1:none panel_name:qcom,mdss_dsi_ams497_720p_video
<6>[    0.996290] mdss_dsi_panel_init: Panel Name = ams497_720p_video
<6>[    0.996668] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ams497_720p_video" (ffffffc04c387360)
<3>[    0.996721] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
<3>[    0.996747] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
<4>[    0.996763] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
<3>[    0.997030] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
<3>[    0.997055] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
<6>[    0.997120] mdss_dsi_parse_panel_features: ulps feature disabled
<6>[    0.997142] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
<6>[    0.997163] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
<3>[    0.997224] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
<3>[    0.997248] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
<3>[    0.997370] mdss_dsi_parse_ctrl_params:4072 Unable to read qcom,display-id, data=0000000000000000,len=45
<3>[    0.997395] mdss_dsi_parse_gpio_params:4108, TE gpio not specified
<6>[    0.997412] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
<6>[    0.997570] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff80005e4780 phy_regulator_size=30
<6>[    0.997591] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80005ba000 ctrl_size=25c phy_base=ffffff80005e2500 phy_size=280
<6>[    0.998083] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi_ctrl0
<6>[    1.019781] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10030001, PHY rev:0x1
<6>[    1.020865] mdss_dsi_status_init: DSI status check interval:5000
<6>[    1.021431] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
<6>[    1.023446] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
<6>[    1.024689] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
<6>[    1.025728] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
<6>[    1.025977] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
<3>[    1.026202] mdss_mdp_splash_parse_dt: splash mem child node is not present