Ruijie SF2910-8GT2MG2XS-P boot log

SF2910-8GT2MG2XS-P.log

Ruijie#reload
Reload system?(Y/N)y

Press RETURN to get started
*Jan  1 00:02:28: %DP-3-RESET_DEV: Reset device 1 due to reload command.
*Jan SysRq : Resettin

Boot SPL 1.2.41-f94ff99 (Feb 04 2021 - 19:27:36)

NAND: Detected flash


Boot 1.2.41-f94ff99 (Feb 04 2021 - 19:27:36)

I2C:   ready
DRAM:  508 MiB
NAND:   Micron MT29F2G08ABAEA, chipsize 256 MiB
In:    serial
Out:   serial
Err:   serial
Unlocking L2 Cache ...Done
arm_clk=1000MHz, axi_clk=400MHz, apb_clk=100MHz, arm_periph_clk=500MHz
SETMAC: Setmac operation was performed at 2022-05-23 05:01:18 (version: 11.0)
Press Ctrl+C to enter Boot Menu
Creating 1 MTD partitions on "nand0":
0x000001000000-0x000002e00000 : "mtd=6"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=6"
UBI: MTD device size:            30 MiB
UBI: number of good PEBs:        240
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             19
UBI: total number of reserved PEBs: 221
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 2/0
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 0, name "kernel"
UBIFS: mounted read-only
UBIFS: file system size:   26030080 bytes (25420 KiB, 24 MiB, 205 LEBs)
UBIFS: journal size:       3682304 bytes (3596 KiB, 3 MiB, 29 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root:  0 bytes (0 KiB)
Unmounting UBIFS volume kernel!
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 823fc000, end 823ff661 ... OK

Starting kernel ...


*Jan  1 00:00:18: %LOCAL_DP-5-LC_PROB: Board information in this chassis has been collected.
*Jan  1 00:00:18: %SWITCH-6-INSTALL: Install chassis SF2910-8GT2MG2XS-P on switch 1
*Jan  1 00:00:19: %DP-6-MASTER: Module in slot 0 has translated to master.
*Jan  1 00:00:23: %DP-6-POWER_OK: Power 1 ok.
*Jan  1 00:00:23: %DEV_MONITOR-5-CARD_POWER_ON: The power enough, card in slot 0 will be controlled to power on automatically.
*Jan  1 00:00:24: %DP-5-PROB: Board probing has completed.
*Jan  1 00:00:24: %DEV_MONITOR-6-DEVICE_INIT: master role init.
*Jan  1 00:00:26: %SYSMON-5-WARMSTART: System warmstart.
~ # *Jan  1 00:00:26: %REDUNDANCY-6-STATES_CHANGE: Redundancy states changed: role master, state alone.
*Jan  1 00:01:15: %SYS-4-CPU_HIGH: warning! system cpu usage above high watermark(85%), current cpu usage 97%
*Jan  1 00:01:15: %SYSMON-4-CPU_WATERMARK_HIGH: TOP 1: pid is 1857, task name is ssa_process, run in core 0, cpu usage 90.3%
*Jan  1 00:01:15: %SYSMON-4-CPU_WATERMARK_HIGH: TOP 2: pid is 1501, task name is sysha, run in core 0, cpu usage  0.6%


Ruijie>en
Ruijie#show version
System description      : Ruijie 10G Ethernet Switch with PoE (SF2910-8GT2MG2XS-P) By Ruijie Networks
System start time       : 1969-12-31 23:59:59
System uptime           : 0:00:02:04
System hardware version : 1.10
System software version : SF29_RGOS 11.4(1)B80P2, Release(08240219)
System patch number     : NA
System serial number    : 
System boot version     : 1.2.41
Module information:
  Slot 0 : SF2910-8GT2MG2XS-P
    Hardware version    : 1.10
    Boot version        : 1.2
    Software version    : SF29_RGOS 11.4(1)B80P2, Release(08240219)
    Serial number       : 
Ruijie#show run

Building configuration...
Current configuration: 1289 bytes

version SF29_RGOS 11.4(1)B80P2, Release(08240219)
!
errdisable recovery interval 180
no spanning-tree
!
rldp enable
!
cwmp
 cpe inform interval 60
!
install 0 SF2910-8GT2MG2XS-P
!
sysmac 7085.c47c.a93d
!
nfpp
!
no service password-encryption
!
redundancy
!
no zam
!
vlan 1
!
interface GigabitEthernet 0/1
 rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/2
 rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/3
 rldp port loop-detect shutdown-port
 poe enable
!
interface GigabitEthernet 0/4
 rldp port loop-detect shutdown-port
 poe enable
!
interface GigabitEthernet 0/5
 rldp port loop-detect shutdown-port
 poe enable
!
interface GigabitEthernet 0/6
 rldp port loop-detect shutdown-port
 poe enable
!
interface GigabitEthernet 0/7
 rldp port loop-detect shutdown-port
 poe enable
!
interface GigabitEthernet 0/8
 rldp port loop-detect shutdown-port
 poe enable
!
interface MTGigabitEthernet 0/9
 rldp port loop-detect shutdown-port
 poe enable
!
interface MTGigabitEthernet 0/10
 rldp port loop-detect shutdown-port
 poe enable
!
interface TenGigabitEthernet 0/11
!
interface TenGigabitEthernet 0/12
!
interface VLAN 1
 ip address dhcp
!
line console 0
line vty 0 4
 login
!
end