6.16.0-rc2-arm64-k3-r3 (with revert of f1471bc435afa31c8c0c58551922830dc8f4b06b )

gistfile1.txt

U-Boot SPL 2025.07-rc4-gd8ef9967dbc6 (Jun 12 2025 - 16:30:21 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
Changed A53 CPU frequency to 1250000000Hz (T grade) in DT
SPL initial stack usage: 13400 bytes
Trying to boot from MMC1
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.13.0(release):v2.13.0
NOTICE:  BL31: Built : 16:30:21, Jun 12 2025
I/TC: 
I/TC: OP-TEE version: 4.6.0 (gcc version 14.2.0 (Debian 14.2.0-19)) #1 Thu Jun 12 16:30:21 UTC 2025 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2025.07-rc4-gd8ef9967dbc6 (Jun 12 2025 - 16:30:21 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
SPL initial stack usage: 1744 bytes
Trying to boot from MMC1


U-Boot 2025.07-rc4-gd8ef9967dbc6 (Jun 12 2025 - 16:30:21 +0000)

SoC:   AM62X SR1.0 GP
Model: BeagleBoard.org BeaglePlay
DRAM:  2 GiB
Core:  108 devices, 31 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from nowhere... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
Net:   eth0: ethernet@8000000port@1
Press SPACE to abort autoboot in 2 seconds
MMC: no card present
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ----------------
Scanning bootdev '[email protected]':
MMC: no card present
MMC: no card present
MMC: no card present
MMC: no card present
Scanning bootdev '[email protected]':
  0  extlinux     ready   mmc          1  [email protected]_ /extlinux/extlinux.conf
** Booting bootflow '[email protected]_1' with extlinux
BeaglePlay eMMC (extlinux.conf) (swap enabled)
1:	eMMC (failsafe)
2:	eMMC disable BCFSERIAL
3:	copy eMMC to microSD
4:	eMMC (debug)
5:	eMMC (default)
Enter choice: 5:	eMMC (default)
Retrieving file: /Image.gz
append: root=/dev/mmcblk0p3 ro rootfstype=ext4 resume=/dev/mmcblk0p2 rootwait net.ifnames=0 quiet
Retrieving file: /ti/k3-am625-beagleplay.dtb
   Uncompressing Kernel Image to 0
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
   Loading Device Tree to 000000008ffed000, end 000000008ffff48d ... OK
Working FDT set to 8ffed000

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    1.600693] bq32k 0-0068: hctosys: unable to read the hardware clock
[    1.601530]  slab kmalloc-192 start ffff000005a3f6c0 pointer offset 8 size 192
[    1.601556] list_add corruption. next->prev should be prev (ffff000005128828), but was ffff800082444278. (next=ffff000005a3f6c8).
[    1.601645] ------------[ cut here ]------------
[    1.601648] kernel BUG at lib/list_debug.c:29!
[    1.601656] Internal error: Oops - BUG: 00000000f2000800 [#1]  SMP
[    1.601665] Modules linked in:
[    1.601680] CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.16.0-rc2-arm64-k3-r3 #1 PREEMPT_{RT,(full)} 
[    1.601689] Hardware name: BeagleBoard.org BeaglePlay (DT)
[    1.601696] Workqueue: events_unbound deferred_probe_work_func
[    1.601721] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.601729] pc : __list_add_valid_or_report+0x78/0xe0
[    1.601743] lr : __list_add_valid_or_report+0x78/0xe0
[    1.601751] sp : ffff8000827fb800
[    1.601754] x29: ffff8000827fb800 x28: ffff00000804da80 x27: ffff000007268b98
[    1.601765] x26: ffff000005128880 x25: ffff800082643610 x24: ffff0000051288c0
[    1.601776] x23: ffff000005128828 x22: ffff000005a3f6c8 x21: ffff00000804d848
[    1.601787] x20: ffff800082444278 x19: ffff000005a3f6c8 x18: 0000000000000014
[    1.601797] x17: 3832383832313530 x16: 3030303066666666 x15: 2820766572702065
[    1.601808] x14: 6220646c756f6873 x13: 2e29386336663361 x12: 3530303030306666
[    1.601819] x11: 66663d7478656e28 x10: 202e383732343434 x9 : ffff800080190184
[    1.601830] x8 : 78656e202e6e6f69 x7 : 0000000000000001 x6 : 0000000000000001
[    1.601840] x5 : ffff000077b62448 x4 : 0000000000000000 x3 : 0000000000000000
[    1.601850] x2 : 0000000000000000 x1 : ffff000000751280 x0 : 0000000000000075
[    1.601862] Call trace:
[    1.601867]  __list_add_valid_or_report+0x78/0xe0 (P)
[    1.601879]  create_regulator+0xcc/0x1c0
[    1.601894]  _regulator_get_common+0x13c/0x3c0
[    1.601903]  _regulator_get+0x48/0xa0
[    1.601910]  _regulator_bulk_get+0xa0/0x280
[    1.601919]  _devm_regulator_bulk_get+0x6c/0xe0
[    1.601928]  devm_regulator_bulk_get_enable+0xa4/0x200
[    1.601937]  it66121_probe+0x154/0x428
[    1.601951]  i2c_device_probe+0x2c8/0x440
[    1.601961]  really_probe+0xc8/0x3a0
[    1.601972]  __driver_probe_device+0x84/0x160
[    1.601982]  driver_probe_device+0x44/0x128
[    1.601992]  __device_attach_driver+0xc4/0x168
[    1.602003]  bus_for_each_drv+0x90/0xf8
[    1.602013]  __device_attach+0xa8/0x1c8
[    1.602023]  device_initial_probe+0x1c/0x30
[    1.602034]  bus_probe_device+0xb0/0xc0
[    1.602043]  deferred_probe_work_func+0xcc/0x130
[    1.602053]  process_one_work+0x180/0x408
[    1.602069]  worker_thread+0x260/0x390
[    1.602080]  kthread+0x12c/0x218
[    1.602091]  ret_from_fork+0x10/0x20
[    1.602108] Code: f94017e1 d0009020 91270000 97d4eb73 (d4210000) 
[    1.602120] ---[ end trace 0000000000000000 ]---
[    1.602126] note: kworker/u16:0[12] exited with irqs disabled
[    1.602130] note: kworker/u16:0[12] exited with preempt_count 1
[    1.602340] ------------[ cut here ]------------
[    1.602345] WARNING: CPU: 2 PID: 0 at kernel/context_tracking.c:127 ct_kernel_exit.isra.0+0xb4/0xc0
[    1.602360] Modules linked in:
[    1.602370] CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Tainted: G      D             6.16.0-rc2-arm64-k3-r3 #1 PREEMPT_{RT,(full)} 
[    1.602379] Tainted: [D]=DIE
[    1.602382] Hardware name: BeagleBoard.org BeaglePlay (DT)
[    1.602386] pstate: 200003c5 (nzCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.602392] pc : ct_kernel_exit.isra.0+0xb4/0xc0
[    1.602399] lr : ct_idle_enter+0x14/0x20
[    1.602406] sp : ffff800082863da0
[    1.602408] x29: ffff800082863da0 x28: 0000000000000000 x27: 0000000000000000
[    1.602419] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[    1.602429] x23: 0000000000000000 x22: ffff800082209e78 x21: ffff0000007d8000
[    1.602440] x20: 0000000000000005 x19: ffff000077b719c8 x18: 0000000075b4adc9
[    1.602450] x17: 00000000f807599f x16: 000000000b515445 x15: 00000000722850f9
[    1.602460] x14: ffff800082209e80 x13: 0000000000000001 x12: 0000000000000002
[    1.602471] x11: 000000005f811406 x10: 0000000000000be0 x9 : ffff8000801f6acc
[    1.602482] x8 : ffff0000007d8c40 x7 : 0000000000000004 x6 : ffff000000751de8
[    1.602492] x5 : 4000000000000002 x4 : ffff7ffff5a8f000 x3 : ffff800082863da0
[    1.602502] x2 : ffff8000820e29c8 x1 : ffff8000820e29c8 x0 : 4000000000000000
[    1.602513] Call trace:
[    1.602516]  ct_kernel_exit.isra.0+0xb4/0xc0 (P)
[    1.602524]  ct_idle_enter+0x14/0x20
[    1.602532]  default_idle_call+0x20/0x178
[    1.602540]  cpuidle_idle_call+0x160/0x1b0
[    1.602551]  do_idle+0x98/0xe0
[    1.602560]  cpu_startup_entry+0x40/0x50
[    1.602568]  secondary_start_kernel+0xd0/0xf8
[    1.602581]  __secondary_switched+0xc0/0xc8
[    1.602592] ---[ end trace 0000000000000000 ]---