geeksville

Using Ollama on an Asus Flow Z13 (128GB RAM) and Linux

Environment setup

I used Bazzite Linux because it seems to have the best 395+ CPU support right now. It also installs and uses podman by default. But the following instructions should work on any linux if:

• You have (very) recent AMD kernel drivers installed
• Podman or Docker installed (I think the instructions before should also work with docker if you just change the tool name)
• Go into the BIOS and bump up the amount of RAM given over to the GPU side by default (I used 64GB but you do you)

geeksville

;K Line Test created by Sebastianv650
; kevinh change to run faster, to force a bigger/more ovious acceleration change

M107
M83  ; extruder relative mode
M104 S200 ; set extruder temp
M140 S75 ; set bed temp
M190 S75 ; wait for bed temp
M109 S200 ; wait for extruder temp
G28 W ; home all without mesh bed level

geeksville

Keybase proof

I hereby claim:

• I am geeksville on github.
• I am geeksville (https://keybase.io/geeksville) on keybase.
• I have a public key ASA5Pd_CWWPUN10cv3CLtGETQ7H5j8gb_qMcKoJUrKLkXQo

To claim this, I am signing this object:

geeksville

Current profiling

for:

tools/mavlogdump.py ~/Downloads/arthur-3dr.tlog

Baseline:

name                                  ncall  tsub      ttot      tavg      
..vutil.py:301 mavlogfile.recv_match  26880  0.065494  2.816088  0.000105
..mavutil.py:281 mavlogfile.recv_msg 26880 0.189414 2.731705 0.000102

geeksville

// ©2012 Viktor Klang

package akka.klang

import akka.dispatch.{ DispatcherPrerequisites, ExecutorServiceFactory, ExecutorServiceConfigurator }
import com.typesafe.config.Config
import java.util.concurrent.{ ExecutorService, AbstractExecutorService, ThreadFactory, TimeUnit }
import java.util.Collections
import javax.swing.SwingUtilities

geeksville

Beta test request for advanced SiK (3dr etc...) telemetry users

Dear APM friends,

We're interested in rolling out a new release of the SiK firmware, but since this firmware so key to safe vehicle operation we want to do a small beta of 'experienced' users/devs first. Would you mind downloading the firmware and installing it on your 3dr telemetry radios?

Steps to install this update

1. Download the updater tool
2. Download the beta test build (This will be release 1.8)

geeksville

Please try and run these steps before the talk (if possible) - they will predownload a bunch of misc build dependancies. If you encounter problems with these instructions, feel free to email me. -kevin

Check that you have java (at least 1.6 or later)... ~/development/scalatalk$ javac -version

javac 1.7.0_21

Download some template tools that that makes it easy to install this sample code...

~/development/scalatalk$ curl https://raw.github.com/n8han/conscript/master/setup.sh | sh

geeksville

<?xml version="1.0" encoding="utf-8"?>
        <!-- Dynamically generated list of documented parameters (generated by param_parse.py) -->    
        <paramfile>
        <vehicles>
        <parameters name="ArduPlane">
<param humanName="USB Console Baud Rate" name="ArduPlane:SERIAL0_BAUD" documentation="The baud rate used on the main uart" user="Standard">
<values>
<value code="1">1200</value>
<value code="2">2400</value>
<value code="4">4800</value>

geeksville

<?xml version="1.0" encoding="utf-8"?>
        <!-- Dynamically generated list of documented parameters (generated by param_parse.py) -->    
        <paramfile>
        <vehicles>
        <parameters name="ArduPlane">
<param humanName="Telemetry Baud Rate" name="ArduPlane:SERIAL0_BAUD" documentation="The baud rate used on the main uart">
<values>
<value code="1">1200</value>
<value code="2">2400</value>
<value code="4">4800</value>

geeksville

Fails 
http://codeeval.com/open_challenge_scores/submissions/?tid=30435 
import scala.io._

val fname = args(0)
Source.fromFile(fname).foreach { c => print(c.toLower) }
System.exit(0)

Passes:
http://codeeval.com/open_challenge_scores/submissions/?tid=30436