Skip to content

Instantly share code, notes, and snippets.

View grobertson's full-sized avatar

Grant Robertson grobertson

20 followers · 31 following
View GitHub Profile
@lucataco
lucataco / ollama_fast_speech_text_speech.py
Last active February 19, 2025 12:29
speech to text to speech using Ollama
""" To use: install Ollama, clone OpenVoice, run this script in the OpenVoice directory
brew install portaudio
brew install git-lfs
git lfs install
git clone https://github.com/myshell-ai/OpenVoice
cd OpenVoice
git clone https://huggingface.co/myshell-ai/OpenVoice
cp -r OpenVoice/* .
@uyjulian
uyjulian / How to install Homebrew package manager Steam Deck.md
Last active April 24, 2025 16:13

How to install Homebrew package manager on Steam Deck

(See also installing Distroboxm, which is included in SteamOS 3.5 and newer: https://distrobox.it/ )
(See also installing Nix package manager: https://determinate.systems/posts/nix-on-the-steam-deck )

You can install Homebrew (a package manager for macOS and Linux) without disabling the read-only partition with sudo steamos-readonly disable.
The package manager can be used alongside Flatpaks. Some software is only available on Flathub, and some software is only available on Homebrew.

  1. Switch to desktop mode (hold power button until a menu appears, then select "Switch to desktop mode")
  2. Click the logo at the bottom left, go to System, then go to Konsole
@matthewpalmer
matthewpalmer / pod.yaml
Last active April 24, 2024 00:00
Example Kubernetes pod for the multi-container sidecar design pattern
# Example YAML configuration for the sidecar pattern.
# It defines a main application container which writes
# the current date to a log file every five seconds.
# The sidecar container is nginx serving that log file.
# (In practice, your sidecar is likely to be a log collection
# container that uploads to external storage.)
# To run:
@mill1000
mill1000 / README.md
Last active March 20, 2025 22:18
Headless A2DP Audio Streaming on Raspbian Stretch

About

This gist will show how to setup Raspbian Stretch as a headless Bluetooth A2DP audio sink. This will allow your phone, laptop or other Bluetooth device to play audio wirelessly through a Rasperry Pi.

Motivation

A quick search will turn up a plethora of tutorials on setting up A2DP on the Raspberry Pi. However, I felt this gist was necessary because this solution is:

  • Automatic & Headless - Once setup, the system is entirely automatic. No user iteration is required to pair, connect or start playback. Therefore the Raspberry Pi can be run headless.
  • Simple - This solution has few dependencies, readily available packages and minimal configuration.
  • Up to date - As of December 2017. Written for Raspbian Stretch & Bluez 5.43

Prerequisites

@klalle
klalle / Melbus_Mitsubishi HU.ino
Last active July 27, 2024 23:24
/* Melbus CDCHGR Emulator
* Program that emulates the MELBUS communication from a CD-changer (CD-CHGR) in a Volvo V70 (HU-xxxx) to enable AUX-input through the 8-pin DIN-contact.
* This setup is using an Arduino Nano 5v clone
*
* The HU enables the CD-CHGR in its source-menue after a successful initialization procedure is accomplished.
* The HU will remove the CD-CHGR everytime the car starts if it wont get an response from CD-CHGR (second init-procedure).
*
* Karl Hagström 2015-11-04
* mod by S. Zeller 2016-03-14
*
@jasonwhite
jasonwhite / joystick.c
Last active April 9, 2025 21:20
Reads joystick/gamepad events on Linux and displays them.
/**
* Author: Jason White
*
* Description:
* Reads joystick/gamepad events and displays them.
*
* Compile:
* gcc joystick.c -o joystick
*
* Run: