Configure multiple GoPro Hero4's over wifi (for 360 balls etc)

configure-cameras.sh

#!/bin/bash
# Requires goproctl from https://github.com/joshvillbrandt/goprohero

# Expects ssid and password as arguments
# Settings from https://github.com/KonradIT/goprowifihack/blob/master/HERO4/WifiCommands.md
function set_camera {
	if [ -e /tmp/gperr ];
	then
		rm /tmp/gperr
	fi
	
	# Connect to wifi network
	goproctl $1 $2 status s 1>/dev/null 2>/tmp/gperr

	# Confirm we actually connected to a GoPro
	if grep -q "Network is unreachable" /tmp/gperr;
	then
		echo "Failed to connect to $1"
		cat /tmp/gperr
		rm /tmp/gperr
		return
	fi

	# Configure the camera
	echo "Configuring $1"

	# Set video primary and video sub-mode
	wget -q http://10.5.5.9/gp/gpControl/command/mode?p=0 -O /dev/null
	wget -q "http://10.5.5.9/gp/gpControl/command/sub_mode?mode=0&sub_mode=0" -O /dev/null

	# Set ProTune on
	wget -q http://10.5.5.9/gp/gpControl/setting/10/1 -O /dev/null

	# Resolution: 1440p
	wget -q http://10.5.5.9/gp/gpControl/setting/2/7 -O /dev/null

	# White Balance (1 = 3000K, 2 = 5500K, 3 = 6500K)
	wget -q http://10.5.5.9/gp/gpControl/setting/11/1 -O /dev/null

	# FOV (0 = Wide, 1 = Med, 2 = Narrow)
	wget -q http://10.5.5.9/gp/gpControl/setting/4/0 -O /dev/null

	# Color (0 = GOPRO, 1 = FLAT)
	wget -q http://10.5.5.9/gp/gpControl/setting/12/1 -O /dev/null

	# ISO (0 = 6400, 1 = 1600, 2 = 400)
	wget -q http://10.5.5.9/gp/gpControl/setting/13/1 -O /dev/null

	# Sharpness (2 = Low, 1 = Med, 0 = High)
	wget -q http://10.5.5.9/gp/gpControl/setting/14/2 -O /dev/null

	# EV (4 = +0, lower numbers increase by 0.5 steps, higher decrease)
	wget -q http://10.5.5.9/gp/gpControl/setting/15/4 -O /dev/null

	# Frame Rate (8 = 30fps, 5 = 60fps)
	wget -q http://10.5.5.9/gp/gpControl/setting/3/8 -O /dev/null

	# Low light off
	wget -q http://10.5.5.9/gp/gpControl/setting/8/0 -O /dev/null

	# Spot meter off
	wget -q http://10.5.5.9/gp/gpControl/setting/9/0 -O /dev/null

	# Orientation Up
	wget -q http://10.5.5.9/gp/gpControl/setting/52/1 -O /dev/null

	# Quick Capture Off
	wget -q http://10.5.5.9/gp/gpControl/setting/54/0 -O /dev/null

	# Beeps off
	wget -q http://10.5.5.9/gp/gpControl/setting/56/2 -O /dev/null

	# Video = NTSC
	wget -q http://10.5.5.9/gp/gpControl/setting/57/0 -O /dev/null

	# Auto off = Never
	wget -q http://10.5.5.9/gp/gpControl/setting/59/0 -O /dev/null

	# LED Mode (1 = "2", 2 = "4", 0 = "Off")
	wget -q http://10.5.5.9/gp/gpControl/setting/55/2 -O /dev/null

	# Dump out the camera setup
	#goproctl $1 $2 status s
}

set_camera "camera1" "password1"
set_camera "camera2" "password2"
set_camera "camera3" "password3"
set_camera "camera4" "password4"
set_camera "camera5" "password5"
set_camera "camera6" "password6"

gistfile1.txt

#!/bin/bash
# Requires goproctl from https://github.com/joshvillbrandt/goprohero

# Expects ssid and password as arguments
# Settings from https://github.com/KonradIT/goprowifihack/blob/master/HERO4/WifiCommands.md
function wipe_camera {
	if [ -e /tmp/gperr ];
	then
		rm /tmp/gperr
	fi
	
	# Connect to wifi network
	goproctl $1 $2 status s 1>/dev/null 2>/tmp/gperr

	# Confirm we actually connected to a GoPro
	if grep -q "Network is unreachable" /tmp/gperr;
	then
		echo "Failed to connect to $1"
		cat /tmp/gperr
		rm /tmp/gperr
		return
	fi

	# Wipe the camera
	echo "Wiping $1"

	wget -q http://10.5.5.9/gp/gpControl/command/storage/delete/all -O /dev/null
}


read -p "Are you sure? " -n 1 -r
echo    # (optional) move to a new line
if [[ $REPLY =~ ^[Yy]$ ]]
then
	wipe_camera "camera1" "password1"
  wipe_camera "camera2" "password2"
  wipe_camera "camera3" "password3"
  wipe_camera "camera4" "password4"
  wipe_camera "camera5" "password5"
  wipe_camera "camera6" "password6"
fi