nibble zmk debug 1

[tio 17:38:04] Connected
] <inf> fs_nvs: 8 Sectors of 4096 bytes
[00:00:00.315,338] <inf> fs_nvs: alloc wra: 0, 918
[00:00:00.315,338] <inf> fs_nvs: data wra: 0, 6ec
[00:00:00.323,150] <wrn> usb_cdc_acm: Device not configured or suspended, drop 1 bytes
[00:00:00.329,742] <dbg> zmk.bvd_init: AIN2 setup returned 0
[00:00:00.331,512] <inf> bt_hci_core: No ID address. App must call settings_load()
[00:00:00.332,855] <dbg> zmk.ble_profiles_handle_set: Setting BLE value profiles/5
[00:00:00.332,855] <wrn> zmk: Profile address for index 5 is larger than max of 5
[00:00:00.332,855] <err> settings: set-value failure. key: ble/profiles/5 error(-22)
[00:00:00.334,686] <dbg> zmk.ble_profiles_handle_set: Setting BLE value active_profile
[00:00:00.353,363] <dbg> zmk.zmk_ble_ready: ready? 0
[00:00:00.353,363] <dbg> zmk.update_advertising: advertising from 0 to 2
[00:00:00.354,492] <dbg> zmk.zmk_sensors_init_item: Init Knob at index 0 with sensor_number 0
[00:00:00.355,407] <inf> usb_hid: Device connected
[00:00:00.355,438] <dbg> zmk.get_selected_endpoint: Only USB is ready.
[00:00:00.355,468] <dbg> zmk.zmk_endpoints_send_report: usage page 0x07
[00:00:00.355,468] <dbg> zmk.zmk_endpoints_send_report: usage page 0x0c
[00:00:00.355,499] <inf> zmk: Endpoint changed: 0
[00:00:00.355,529] <dbg> zmk.destination_connection: Address pointer 0x20018674
[00:00:00.355,560] <wrn> zmk: Not sending, no active address for current profile
[00:00:00.355,560] <dbg> zmk.destination_connection: Address pointer 0x20018674
[00:00:00.355,560] <wrn> zmk: Not sending, no active address for current profile
[00:00:00.358,551] <inf> usb_cdc_acm: Device suspended
[00:00:00.358,551] <inf> usb_hid: Device suspended
[00:00:00.358,581] <dbg> zmk.get_selected_endpoint: Only USB is ready.
[00:00:00.364,257] <dbg> zmk.bvd_sample_fetch: ADC raw 4059 ~ 2972 mV => 4169 mV
[00:00:00.364,257] <dbg> zmk.bvd_sample_fetch: Percent: 96
[00:00:00.364,257] <dbg> zmk.zmk_battery_update: Setting BAS GATT battery level to 96.
[00:00:00.366,516] <dbg> zmk.endpoints_handle_set: Setting endpoint value preferred
[00:00:00.366,607] <dbg> zmk.get_selected_endpoint: Only USB is ready.
[00:00:00.371,368] <inf> lvgl: lv_init ready
[00:00:00.371,551] <inf> lvgl: Object create ready
[00:00:00.371,673] <inf> lvgl: Object create ready
[00:00:00.371,795] <inf> lvgl: Object create ready
[00:00:00.371,917] <dbg> zmk.kscan_gpio_init_0: Configured pin 31 on GPIO_0 for input
[00:00:00.371,948] <dbg> zmk.kscan_gpio_init_0: Configured pin 29 on GPIO_0 for input
[00:00:00.371,948] <dbg> zmk.kscan_gpio_init_0: Configured pin 2 on GPIO_0 for input
[00:00:00.371,948] <dbg> zmk.kscan_gpio_init_0: Configured pin 15 on GPIO_1 for input
[00:00:00.371,978] <dbg> zmk.kscan_gpio_init_0: Configured pin 13 on GPIO_1 for input
[00:00:00.372,070] <inf> zmk: Welcome to ZMK!

[00:00:00.372,100] <dbg> zmk.kscan_gpio_configure_0: Configured GPIO 0
[00:00:00.372,314] <dbg> zmk.zmk_display_init:
[00:00:00.372,436] <inf> lvgl: Object create ready
[00:00:00.372,619] <inf> lvgl: Object create ready
[00:00:00.372,863] <inf> lvgl: label created
[00:00:00.373,626] <dbg> zmk.zmk_widget_battery_status_obj: Label: 0x200165a0
[00:00:00.373,840] <inf> lvgl: Object create ready
[00:00:00.374,084] <inf> lvgl: label created
[00:00:00.375,061] <inf> lvgl: Object create ready
[00:00:00.375,305] <inf> lvgl: label created
[00:00:00.375,823] <dbg> zmk.set_layer_symbol: Layer changed to 0
[00:00:00.444,702] <dbg> zmk.zmk_display_init:
[00:00:00.456,878] <inf> usb_cdc_acm: Device resumed
[00:00:00.456,878] <inf> usb_cdc_acm: from suspend
[00:00:00.456,878] <inf> usb_hid: Device resumed
[00:00:00.456,909] <inf> usb_hid: from suspend
[00:00:00.456,909] <dbg> zmk.get_selected_endpoint: Only USB is ready.
[00:00:00.457,305] <inf> usb_hid: Device reset detected
[00:00:00.457,336] <dbg> zmk.get_selected_endpoint: No endpoints are ready.
[00:00:00.457,336] <dbg> zmk.zmk_endpoints_send_report: usage page 0x07
[00:00:00.457,336] <err> zmk: FAILED TO SEND OVER USB: -19
[00:00:00.457,336] <dbg> zmk.zmk_endpoints_send_report: usage page 0x0c
[00:00:00.457,366] <err> zmk: FAILED TO SEND OVER USB: -19
[00:00:00.457,366] <inf> zmk: Endpoint changed: 1
[00:00:00.529,052] <inf> usb_cdc_acm: Device configured
[00:00:00.529,083] <inf> usb_hid: Device configured
[00:00:00.529,113] <dbg> zmk.get_selected_endpoint: Only USB is ready.
[00:00:00.529,113] <dbg> zmk.zmk_endpoints_send_report: usage page 0x07
[00:00:00.529,144] <dbg> zmk.zmk_endpoints_send_report: usage page 0x0c
[00:00:00.529,144] <inf> zmk: Endpoint changed: 0
[00:00:00.529,663] <dbg> zmk.destination_connection: Address pointer 0x20018674
[00:00:00.529,663] <wrn> zmk: Not sending, no active address for current profile
[00:00:00.529,693] <dbg> zmk.destination_connection: Address pointer 0x20018674
[00:00:00.529,724] <wrn> zmk: Not sending, no active address for current profile