Created
October 5, 2024 04:21
-
-
Save sjlongland/4fa62cd5dd1e8351212c4f5d03eeceaf to your computer and use it in GitHub Desktop.
Samsung N150+ dmesg (DragonFlyBSD 6.4)
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Copyright (c) 2003-2022 The DragonFly Project. | |
| Copyright (c) 1992-2003 The FreeBSD Project. | |
| Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
| The Regents of the University of California. All rights reserved. | |
| MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0 | |
| MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1 | |
| DragonFly v6.4.0-RELEASE #54: Fri Dec 30 09:06:50 PST 2022 | |
| [email protected]:/usr/obj/usr/src/sys/X86_64_GENERIC | |
| acpi_hpet: frequency 14318180 | |
| Using cputimer HPET for TSC calibration | |
| Timer latency (in TSC ticks): 1699 min=1250 max=1950 | |
| TSC clock: 1662483019 Hz | |
| CPU: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (1662.48-MHz K8-class CPU) | |
| Origin = "GenuineIntel" Id = 0x106ca Stepping = 10 | |
| Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
| Features2=0x40e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> | |
| AMD Features=0x20100800<SYSCALL,NX,LM> | |
| AMD Features2=0x1<LAHF> | |
| Thermal and PM Features=0x1<SENSOR> | |
| MONITOR/MWAIT Features=0x3<CST,INTBRK> | |
| real memory = 2135219200 (2036 MB) | |
| avail memory = 2032189440 (1938 MB) | |
| madt_lapic_probe: lapic_count=2 x2apic_count=0 | |
| ACPI CPUS = 2 | |
| lapic: divisor index 0, frequency 83124231 Hz | |
| CPU Topology: cores_per_chip: 1; threads_per_core: 2; chips_per_package: 1; | |
| srat_probe: can't locate SRAT | |
| SMI Frequency (worst case): 27 Hz (35817 us) | |
| Initialize MI interrupts for 2 cpus | |
| TSC is not invariant, no further tests will be performed | |
| Spectre: support=( none ) req=ffff operating=( none ) | |
| MDS: support=( none ) req=ffff operating=( none ) | |
| machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug | |
| system call performance will be impacted | |
| interrupt uses mplock: swi_taskq | |
| wdog: In-kernel automatic watchdog reset enabled | |
| md0: Malloc disk | |
| evdev device loaded. | |
| kbd1 at kbdmux0 | |
| ACPI: RSDP 0x00000000000F7DA0 000024 (v02 PTLTD ) | |
| ACPI: XSDT 0x000000007F5B8D8D 00006C (v01 SECCSD LH43STAR 06040000 LTP 00000000) | |
| ACPI: FACP 0x000000007F5BFC92 0000F4 (v03 INTEL 06040000 PTL 00000002) | |
| ACPI: DSDT 0x000000007F5B9FF5 005BA9 (v01 INTEL BEARG31A 06040000 MSFT 03000001) | |
| ACPI: FACS 0x000000007F5C2FC0 000040 | |
| ACPI: MCFG 0x000000007F5BFD86 00003C (v01 PTLTD MCFG 06040000 LTP 00000000) | |
| ACPI: HPET 0x000000007F5BFDC2 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) | |
| ACPI: APIC 0x000000007F5BFDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000) | |
| ACPI: BOOT 0x000000007F5BFE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) | |
| ACPI: SLIC 0x000000007F5BFE8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) | |
| ACPI: SSDT 0x000000007F5B9395 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) | |
| ACPI: SSDT 0x000000007F5B92EF 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) | |
| ACPI: SSDT 0x000000007F5B8DF9 0004F6 (v02 PmRef CpuPm 00003000 INTL 20050624) | |
| sc0: <System console> on motherboard | |
| sc0: VGA <16 virtual consoles, flags=0x300> | |
| cryptosoft0: <software crypto> on motherboard | |
| acpi0: <SECCSD LH43STAR> on motherboard | |
| ACPI: 4 ACPI AML tables successfully acquired and loaded | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKH (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKG (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKF (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKG (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKH (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKE (20211217/dspkginit-607) | |
| ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKE (20211217/dspkginit-607) | |
| ACPI FADT: SCI testing interrupt mode ... | |
| ACPI FADT: SCI select level/high | |
| acpi0: Power Button (fixed) | |
| acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
| acpi_timer0 on acpi0 | |
| cpu0: <ACPI CPU> on acpi0 | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFFF800659A9C00 000203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFFF80067B45480 0006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624) | |
| cpu_cst0: <ACPI CPU C-State> on cpu0 | |
| cpu_pst0: <ACPI CPU P-State> on cpu0 | |
| clockmod0: <CPU clock modulation> on cpu0 | |
| coretemp0: <CPU On-Die Thermal Sensors> on cpu0 | |
| cpu1: <ACPI CPU> on acpi0 | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFFF800461B0740 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFFF80046148BE0 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) | |
| cpu_cst1: <ACPI CPU C-State> on cpu1 | |
| cpu_pst1: <ACPI CPU P-State> on cpu1 | |
| clockmod1: <CPU clock modulation> on cpu1 | |
| coretemp1: <CPU On-Die Thermal Sensors> on cpu1 | |
| acpi_ec0: <Embedded Controller: GPE 0x11> port 0x66,0x62 on acpi0 | |
| acpi_acad0: <AC Adapter> on acpi0 | |
| acpi_lid0: <Control Method Lid Switch> on acpi0 | |
| acpi_button0: <Power Button> on acpi0 | |
| acpi_button1: <Sleep Button> on acpi0 | |
| acpi_tz0: <Thermal Zone> on acpi0 | |
| battery0: <ACPI Control Method Battery> on acpi0 | |
| pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
| pci0: <ACPI PCI bus> on pcib0 | |
| vgapci0: <VGA-compatible display> port 0x18d0-0x18d7 mem 0xf0000000-0xf00fffff,0xd0000000-0xdfffffff,0xf0300000-0xf037ffff irq 16 at device 2.0 on pci0 | |
| agp0: <Intel Pineview (M) SVGA controller> on vgapci0 | |
| agp0: aperture size is 256M, detected 8188k stolen memory | |
| vgapci0: Boot video device | |
| vgapci1: <VGA-compatible display> mem 0xf0380000-0xf03fffff at device 2.1 on pci0 | |
| pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 22 | |
| pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 | |
| pci5: <ACPI PCI bus> on pcib1 | |
| pci5: <network> (vendor 0x14e4, dev 0x4727) at device 0.0 irq 16 | |
| pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 | |
| pci7: <ACPI PCI bus> on pcib2 | |
| pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 | |
| pci9: <ACPI PCI bus> on pcib3 | |
| mskc0: <Marvell Yukon 88E8040 Fast Ethernet> port 0x2000-0x20ff mem 0xf0200000-0xf0203fff irq 18 at device 0.0 on pci9 | |
| msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0 | |
| miibus0: <MII bus> on msk0 | |
| e1000phy0: <Marvell 88E3016 10/100 PHY> on miibus0 | |
| e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto | |
| msk0: MAC address: 00:24:54:b7:00:8a | |
| pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 | |
| pci11: <ACPI PCI bus> on pcib4 | |
| uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0 | |
| usbus0 on uhci0 | |
| usbus0: 12Mbps Full Speed USB v1.0 | |
| uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0 | |
| ugen0.1: <Intel> at usbus0 | |
| uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 | |
| usbus1 on uhci1 | |
| usbus1: 12Mbps Full Speed USB v1.0 | |
| uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0 | |
| ugen1.1: <Intel> at usbus1 | |
| uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 | |
| usbus2 on uhci2 | |
| usbus2: 12Mbps Full Speed USB v1.0 | |
| uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0 | |
| ugen2.1: <Intel> at usbus2 | |
| uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 | |
| uhub0: 2 ports with 2 removable, self powered | |
| usbus3 on uhci3 | |
| usbus3: 12Mbps Full Speed USB v1.0 | |
| ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0604000-0xf06043ff irq 23 at device 29.7 on pci0 | |
| usbus4: EHCI version 1.0 | |
| ugen3.1: <Intel> at usbus3 | |
| uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 | |
| usbus4 on ehci0 | |
| usbus4: 480Mbps High Speed USB v2.0 | |
| pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 | |
| pci17: <ACPI PCI bus> on pcib5 | |
| isab0: <PCI-ISA bridge> at device 31.0 on pci0 | |
| isa0: <ISA bus> on isab0 | |
| ahci0: <AHCI-PCI-SATA> port 0x18c0-0x18cf,0x18d8-0x18db,0x18e0-0x18e7,0x18dc-0x18df,0x18e8-0x18ef mem 0xf0604400-0xf06047ff irq 19 at device 31.2 on pci0 | |
| ugen4.1: <Intel> at usbus4 | |
| uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 | |
| uhub1: 2 ports with 2 removable, self powered | |
| uhub2: 2 ports with 2 removable, self powered | |
| uhub3: 2 ports with 2 removable, self powered | |
| ahci0: Intel hocus pocus | |
| ahci0: AHCI 1.1 cap 0xc720ff03<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC>, 4 ports, 32 tags/port, gen 2 (3Gbps) | |
| uhub4: 8 ports with 8 removable, self powered | |
| ahci0.0: Found SSD "Samsung SSD 860 EVO 250GB RVT01B6Q" serial="S3Y9NB0K263602M" | |
| ahci0.0: tags=32/32 satacap=850e satacap2=00c4 satafea=016c NCQ=YES capacity=238475.17MB | |
| ahci0.0: f85=7469 f86=bc01 f87=4163 WC=enabled RA=enabled SEC=frozen | |
| ugen4.2: <Realtek> at usbus4 | |
| ugen1.2: <Broadcom Corp> at usbus1 | |
| ugen4.3: <Namuga.> at usbus4 | |
| ahci0.2: No device detected | |
| ahci0.1: No device detected | |
| ahci0.3: No device detected | |
| pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 19 | |
| atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 | |
| atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
| kbd0 at atkbd0 | |
| psm0: <PS/2 Mouse> irq 12 on atkbdc0 | |
| interrupt uses mplock: psm0 | |
| psm0: model IntelliMouse, device ID 3 | |
| ACPI: Enabled 7 GPEs in block 00 to 1F | |
| aesni0: No AESNI support. | |
| padlock0: No ACE support. | |
| rdrand0: No RdRand support. | |
| orm0: <ISA Option ROMs> at iomem 0xce000-0xcf7ff,0xdf000-0xdffff on isa0 | |
| vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | |
| sio0: can't drain, serial port might not exist, disabling | |
| sio1: can't drain, serial port might not exist, disabling | |
| hpt27xx: no controller detected. | |
| CAM: Configuring 4 busses | |
| CAM: finished configuring all busses | |
| da0 at ahci0 bus 0 target 0 lun 0 | |
| da0: <SATA Samsung SSD 860 RVT0> Fixed Direct Access SCSI-4 device | |
| da0: Serial Number S3Y9NB0K263602M | |
| da0: 300.000MB/s transfers | |
| da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) | |
| da0: supports TRIM | |
| Mounting root from hammer2:serno/S3Y9NB0K263602M.s1d | |
| hammer2_mount: root devstr="serno/S3Y9NB0K263602M.s1d" | |
| hammer2_mount: device="serno/S3Y9NB0K263602M.s1d" label="ROOT" rdonly=1 | |
| hammer2_ondisk: "/dev/serno/S3Y9NB0K263602M.s1d" zone=0 id=0 offset=0x0000000000000000 size=0x0000000f00000000 | |
| hammer2_mount: hmp=0xfffff80068e40000 pmp=0xfffff80067cbd000 | |
| DMA space used: 6160k, remaining available: 128112k | |
| Mounting devfs | |
| hammer2_mount: "serno/S3Y9NB0K263602M.s1d": no recovery needed | |
| hammer2: enable read/write | |
| reconnect to cluster: nc=1 focus=0 | |
| not a local device mount | |
| hammer2_mount: devstr="/dev/serno/S3Y9NB0K263602M.s1e@DATA" | |
| hammer2_mount: device="/dev/serno/S3Y9NB0K263602M.s1e" label="DATA" rdonly=0 | |
| hammer2_ondisk: "/dev/serno/S3Y9NB0K263602M.s1e" zone=0 id=0 offset=0x0000000000000000 size=0x0000002800000000 | |
| hammer2_mount: "/dev/serno/S3Y9NB0K263602M.s1e": no recovery needed | |
| hammer2_mount: hmp=0xfffff800abf20000 pmp=0xfffff800ac5e8600 | |
| hammer2_mount: devstr="/dev/serno/S3Y9NB0K263602M.s1f@DATA" | |
| hammer2_mount: device="/dev/serno/S3Y9NB0K263602M.s1f" label="DATA" rdonly=0 | |
| hammer2_ondisk: "/dev/serno/S3Y9NB0K263602M.s1f" zone=3 id=0 offset=0x0000000000000000 size=0x00000001f8000000 | |
| hammer2_mount: "/dev/serno/S3Y9NB0K263602M.s1f": no recovery needed | |
| hammer2_mount: hmp=0xfffff800acb9c000 pmp=0xfffff80067ca1800 | |
| urtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 2> on usbus4 | |
| urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R | |
| urtwn0: enabling 11n | |
| wlan0: driver didn't set altq_maxlen | |
| wlan0: MAC address: 9c:53:22:69:ad:a6 | |
| swap low/high-water marks set to 41940/62910 | |
| urtwn-rtl8188eufw: You need to read the LICENSE file in /usr/share/doc/legal/realtek/. | |
| urtwn-rtl8188eufw: If you agree with the license, set legal.realtek.license_ack=1 in /boot/loader.conf. | |
| module_register_init: MOD_LOAD (urtwn_rtl8188eufw_fw, ffffffff82666000, 0) error 1 | |
| urtwn-rtl8188eufw: firmware image loaded, but did not register | |
| urtwn0: failed loadfirmware of file urtwn-rtl8188eufw | |
| ugen4.4: <TP-LINK> at usbus4 | |
| ugen4.4: <TP-LINK> at usbus4 (disconnected) | |
| ugen4.4: <Generic> at usbus4 | |
| umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.00, addr 4> on usbus4 | |
| da8 at umass-sim0 bus 0 target 0 lun 0 | |
| da8: <Generic Flash Disk 8.07> Removable Direct Access SCSI-4 device | |
| da8: Serial Number 23052706050043 | |
| da8: 40.000MB/s transfers | |
| da8: 7450MB (15257600 512 byte sectors: 255H 63S/T 949C) | |
| ugen4.4: <Generic> at usbus4 (disconnected) | |
| umass0: at uhub4, port 1, addr 4 (disconnected) | |
| (da8:umass-sim0:0:0:0): lost device | |
| (da8:umass-sim0:0:0:0): removing device entry | |
| umass0: detached |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment