Eweadn CR87 mechanical keyboard instructions

eweadn-cr87.md

Eweadn CR87 mechanical keyboard instructions

Keyboard shortcuts

FN +

• F1 = brightness -
• F2 = brightness +
• F3 = calculator
• F4 = my computer
• F5 = player
• F6 = prev song
• F7 = next song
• F8 = play/pause
• F9 = stop
• F10 = mute
• F11 = vol -
• F12 = vol +
• WIN = lock logo key
• W = win system
• A = mac system

Mac function keys (from left to right):

• F1 = brightness -
• F2 = brightness +
• F3 = mission control
• F4 = launchpad
• F5 = -
• F6 = -
• F7 = prev song
• F8 = play/pause
• F9 = next song
• F10 = mute
• F11 = vol -
• F12 = vol +

Charging

The last single indicator light:

• Always on = charging
• Off = fully charged
• Flashing = low on power

Fast charging is not supported, use the matching charging cable to connect to the computer to charge the keyboard.

Modes

Bluetooth (FN + 1/2/3)

1. Turn the switch to ON.
2. Use FN + l / FN + 2 / FN + 3 to switch Bluetooth mode (there are three channels).

• CAP light flashes slowly when reconnecting, flashes quickly when pairing.
• After connecting, the indicator light function is restored.
• Short press to switch channels, long press for 3S to pair.
• Bluetooth name is (EWEADN-CR87).

2.4Ghz (FN + 4)

1. Turn the switch to ON.
2. Press FN + 4 to enter 2.4Ghz mode.
3. Insert the paired dedicated receiver.

• CAP light flashes slowly when reconnecting and flashes quickly when pairing.
• After connecting, the indicator light function is restored.
• Short press to switch channels, long press for 3S to pair.

Wired (FN + 5)

1. Use FN + 5 to switch to wired mode.
2. Insert the cable into the TYPE-C interface, and connect the other end to the computer.
3. The keyboard can be used normally.

Sleep

• The sleep light goes off after 30 seconds when the keyboard is not connected.
• The sleep light goes off after 2 minutes when the keyboard is connected.
• With wireless (bt and 2.4Ghz) the deep sleep light goes off after 15 minutes.