| Material | Model | Density (gm/cm^3) | Young's Modulus (MPa) | Tensile Strength (MPa) | Bending Strength (MPa) | Charpy impact strength (kJ/m^2) |
|---|---|---|---|---|---|---|
| Onyx [1] [2] [3] | Markforged Onyx | 1.2 | 1400 | 30 | 81 | 10.72 |
| PLA [12] | Prusa PLA | 1.24 | 2200 | 50.8 | 12.7 | |
| PLA [4] | PolyLite PLA | 1.20 | 2636 | 46.6 | 85.1 | 2.7 |
| PLA+ [5] | PolyMax PLA | 1.20 | 1879 | 28.1 | 48 | 12.2 |
| ABS [6] | PolyLite ABS | 1.12 | 2174 | 33.3 | 59 | 12.6 |
| ASA [7] | PolyLite ASA | 1.1 | 2379 | 43.8 | 73.4 | 10.3 |
| PETG [8] | PolyLite PETG | 1.25 | 1472 | 31.9 | 53.7 | 5.1 |
| PETG+ [9] | PolyMax PETG | 1.25 | 1523 | 31.7 | 58.3 | 9.7 |
| Polycarb [10] | PolyLite PC | 1.19 | 2307 | 62.7 | 100.4 | 3.4 |
| Polycarb+ [11] | PolyMAX PC | 1.19 | 2048 | 59.7 | 94.1 | 25.1 |
| TPU [13] | NinjaTek Armadillo | 1.18 | 27 | 3.0* |
- Used Izod test, not Charpy
[1] https://static.markforged.com/markforged_composites_datasheet.pdf
[2] Onyx Charpy: https://scholarworks.rit.edu/cgi/viewcontent.cgi?article=11338&context=theses
[3] Onyx Young's Modulus: https://www.matec-conferences.org/articles/matecconf/pdf/2019/03/matecconf_mms18_01018.pdf
[4] https://us.polymaker.com/Downloads/TDS/PolyLite_PLA_TDS_V4.pdf
[5] https://us.polymaker.com/Downloads/TDS/PolyMax_PLA_TDS_V4.pdf
[6] https://us.polymaker.com/Downloads/TDS/PolyLite_ABS_TDS_V4.pdf
[7] https://polymaker.com/Downloads/TDS/PolyLite_ASA_TDS_V4.1.pdf
[8] https://us.polymaker.com/Downloads/TDS/PolyLite_PETG_TDS_V4.pdf
[9] https://us.polymaker.com/Downloads/TDS/PolyMax_PETG_TDS_V4.pdf
[10] https://us.polymaker.com/Downloads/TDS/PolyLite_PC_TDS_V4.pdf
[11] https://us.polymaker.com/Downloads/TDS/PolyMax_PC_TDS_V4.pdf
[12] https://shop.prusa3d.com/fotky/PLA_TechSheet_ENG.pdf
[13] https://ninjatek.com/wp-content/uploads/2018/10/Armadillo-TDS.pdf