Linux Network Traffic Measure/Calculator Python Script

measure.py

#!/usr/bin/env python

'''
 _______     ______  
|_   _\ \   / / ___| 
  | |  \ \ / /\___ \ 
  | |   \ V /  ___) |
  |_|    \_/  |____/ 
Teske Virtual System  

Made by Lucas Teske 

This script reads /proc/net/dev using tools.py to get the data.
The average TX/RX Rates are calculated using an Low Pass Complementary Filter with k
configured as AVG_LOW_PASS. Default to 0.2

This should output something like this on your console:
eth0: in B/S
	RX - MAX: 0 AVG: 0 CUR: 0
	TX - MAX: 0 AVG: 0 CUR: 0

lo: in B/S
	RX - MAX: 1972 AVG: 0 CUR: 0
	TX - MAX: 1972 AVG: 0 CUR: 0

wlan0: in B/S
	RX - MAX: 167658 AVG: 490 CUR: 188
	TX - MAX: 3648202 AVG: 386 CUR: 424

vmnet1: in B/S
	RX - MAX: 0 AVG: 0 CUR: 0
	TX - MAX: 0 AVG: 0 CUR: 0

'''

import time
import math
from tools import *

INTERVAL = 1            #   1 second
AVG_LOW_PASS = 0.2      #   Simple Complemetary Filter

ifaces = {}

print "Loading Network Interfaces"
idata = GetNetworkInterfaces()
print "Filling tables"
for eth in idata:
    ifaces[eth["interface"]] = {
        "rxrate"    :   0,
        "txrate"    :   0,
        "avgrx"     :   0,
        "avgtx"     :   0,
        "toptx"     :   0,
        "toprx"     :   0,
        "sendbytes" :   eth["tx"]["bytes"],
        "recvbytes" :   eth["rx"]["bytes"]
    }
    
while True:
    idata = GetNetworkInterfaces()
    for eth in idata:
        #   Calculate the Rate
        ifaces[eth["interface"]]["rxrate"]      =   (eth["rx"]["bytes"] - ifaces[eth["interface"]]["recvbytes"]) / INTERVAL
        ifaces[eth["interface"]]["txrate"]      =   (eth["tx"]["bytes"] - ifaces[eth["interface"]]["sendbytes"]) / INTERVAL
        
        #   Set the rx/tx bytes
        ifaces[eth["interface"]]["recvbytes"]   =   eth["rx"]["bytes"]
        ifaces[eth["interface"]]["sendbytes"]   =   eth["tx"]["bytes"]
        
        #   Calculate the Average Rate
        ifaces[eth["interface"]]["avgrx"]       =   int(ifaces[eth["interface"]]["rxrate"] * AVG_LOW_PASS + ifaces[eth["interface"]]["avgrx"] * (1.0-AVG_LOW_PASS))
        ifaces[eth["interface"]]["avgtx"]       =   int(ifaces[eth["interface"]]["txrate"] * AVG_LOW_PASS + ifaces[eth["interface"]]["avgtx"] * (1.0-AVG_LOW_PASS))
        
        #   Set the Max Rates
        ifaces[eth["interface"]]["toprx"]       =   ifaces[eth["interface"]]["rxrate"] if ifaces[eth["interface"]]["rxrate"] > ifaces[eth["interface"]]["toprx"] else ifaces[eth["interface"]]["toprx"]
        ifaces[eth["interface"]]["toptx"]       =   ifaces[eth["interface"]]["txrate"] if ifaces[eth["interface"]]["txrate"] > ifaces[eth["interface"]]["toptx"] else ifaces[eth["interface"]]["toptx"]
        
        print "%s: in B/S" %(eth["interface"])
        print "\tRX - MAX: %s AVG: %s CUR: %s" %(ifaces[eth["interface"]]["toprx"],ifaces[eth["interface"]]["avgrx"],ifaces[eth["interface"]]["rxrate"])
        print "\tTX - MAX: %s AVG: %s CUR: %s" %(ifaces[eth["interface"]]["toptx"],ifaces[eth["interface"]]["avgtx"],ifaces[eth["interface"]]["txrate"])
        print ""
    time.sleep(INTERVAL) 

tools.py

#!/usr/bin/env python

'''
 _______     ______  
|_   _\ \   / / ___| 
  | |  \ \ / /\___ \ 
  | |   \ V /  ___) |
  |_|    \_/  |____/ 
Teske Virtual System  

Made by Lucas Teske 

This is an tool script that I did for getting network interface data 
from /proc/net/dev. I got all data you could from /proc/net/dev

Let me know if any linux kernel outputs different things on /proc/net/dev

'''

def GetNetworkInterfaces():
    ifaces = []
    f = open("/proc/net/dev")
    data = f.read()
    f.close()
    data = data.split("\n")[2:]
    for i in data:
        if len(i.strip()) > 0:
            x = i.split()
            # Interface |                        Receive                          |                         Transmit
            #   iface   | bytes packets errs drop fifo frame compressed multicast | bytes packets errs drop fifo frame compressed multicast
            k = {
                "interface" :   x[0][:len( x[0])-1],   
                "tx"        :   {
                    "bytes"         :   int(x[1]),
                    "packets"       :   int(x[2]),
                    "errs"          :   int(x[3]),
                    "drop"          :   int(x[4]),
                    "fifo"          :   int(x[5]),
                    "frame"         :   int(x[6]),
                    "compressed"    :   int(x[7]),
                    "multicast"     :   int(x[8])
                },
                "rx"        :   {
                    "bytes"         :   int(x[9]),
                    "packets"       :   int(x[10]),
                    "errs"          :   int(x[11]),
                    "drop"          :   int(x[12]),
                    "fifo"          :   int(x[13]),
                    "frame"         :   int(x[14]),
                    "compressed"    :   int(x[15]),
                    "multicast"     :   int(x[16])
                }
            }
            ifaces.append(k)
    return ifaces

https://support.huawei.com/enterprise/en/doc/EDOC1100059437/88ff0ab5/example-for-configuring-public-network-ipv6-frr
https://techhub.hpe.com/eginfolib/networking/docs/switches/5510hi/5200-0077b_l3-ip-rtng_cg/content/472699352.htm